Vinay![]() Elite ![]() ![]() ![]() Posts: 640 Joined: 12/9/2011 Location: Planet Earth ![]() | Interestingly when I removed the T3S3 system from the Confirm Block which fired the confirming signal the last and which went to Voteline, the Signal on Voteline shifts to left by one bar when another system T3S1 fired the confirming Signal. Moreover when I removed T3S1 also then the Signal on Voteline shifts to left by one bar once again when the confirming Signal was fired by VBX-3. It is clear that the Signal on the Voteline changes with each passing day if there are more than 1 system in the Confirm Block firing confirming signals during tolerance period. I wasted hundreds of hours first to develop this seemingly "amazing" strategy and then to figure out what's wrong with it. It is surprising that even after so many years of its existence the Confirm Block have such serious bug which went undetected or may be detected but not fixed. P.S. Barry please move this post to Technical Support Forum. [Edited by Vinay on 9/19/2014 10:05 AM] |