SteveL![]() Veteran ![]() ![]() ![]() ![]() Posts: 262 Joined: 8/19/2005 Location: Boulder, CO ![]() | Hi, Tony. First, I am assuming you have OmniScan, and have selected/enabled the SP100 and SP500 lists. You can now select each of those lists from the symbol list dropdown, one at a time, or view all at once in the "All analyzed symbols" list. Second, you need to have all the strategies enabled for this focus list. Click on the chess piece, and enable both your SP500 and SP100 strategies. NOW: 1. Start with the SP500 list - select the SP500 list from the symbol list dropdown. 2. Select/mark all the symbols - start at top of list, highlight first stock, go to bottom of list, and while holding the Shift key select the last stock in the list. All stocks should now be highlighted (blue). 3. Enable the strategies for this highlighted of stocks - Right click on the selected symbols, select Enable Strategies->Custom and tick-mark the strategies that you want to enable for the SP500 stocks. 4. Choose the SP100 list from the dropdown, and repeat steps 2 and 3. Since most of the SP100 symbols are in the SP500, they will already have the SP500 strategies enabled. You need to leave those strategies enabled, and add whatever additional strategies you want to run on the SP100 symbols. NOTE: Symbols common to both lists, will have the full set of strategies enabled, both those selected for the SP100 and those selected for the SP500. [Edited by SteveL on 12/24/2014 9:38 AM] |