Keith Parsons Regular  Posts: 76 Joined: 6/28/2009 Location: Durban, South Africa  User Profile | Good day, I am presently running simultaneous ATM3 tests on two (2) of my PC's focusing on the Port Sim results. Within reason - the Port Sim results "are roughly the same" for these two machines. However at times when making the same adjustment to both machines the results from these two machines are very different. I do ensure that the Results, VBA > Chart Chart & Temp folders plus are constantly cleaned out. My Question: I seem to recall last year where a member in a post was querying his P.S. results. I am sure Mark H replied by saying that "he sometimes closes off his PC once he had made the Port Sim adjustments. He then re-opens his PC and only then does the Focus List run. That he (Mark) remembered Ed had once during a seminar made a brief comment on this requirement" If my "memory" on this is correct - I would sure appreciate being given the relevant post link. It would be nice to be able to add this to ones check list. Many thanks, Keith Parsons. | |
