mholstius Regular  Posts: 76 Joined: 6/15/2011  User Profile | I’m catching up on my reading over the weekend and wanted to say thanks for all the info provided in this thread in just 2 days. Not sure if this suggestion might help, but maybe using SYSIND() in an indicator or system might help in calling and combining the output of multiple systems. Here’s a snag of what I got applying it to CTX-1 and VBX-4 on the SPY as a quick test; Selecting SYSIND in Omnilanguage brings up this: SYSIND("",0,0,0,0,0,0,0,0,0,0) So, I’m not sure of the parameters you’d need to apply. Maybe Barry can weigh in on that. (?) Hope everyone has a good weekend, Mark P.S I just realized that first snag was awfully large, so I've re- posted it a bit smaller. Also - I ran the SPY again using just VBX-4 since my test impressed me so much with the signals from Jeff's new system; [Edited by mholstius on 9/25/2021 5:25 PM]  Attached file : SysInd example2.png (212KB - 347 downloads) Attached file : Just VBX4 Entries.png (81KB - 371 downloads) |
